Power Clamp Meter

• Measures AC/DC current to 1000A
• True RMS AC Measurements
• Measures true power, apparent power and power factor
• Auto/Manual ranging
• Frequency counter
• 40 segment analog bar graph
• 2-1/4" Jaw opening
• Meets IEC-1010 Category III 600V Safety Standards

• Maximum conductor size 30mm.
• Display counts: 4000.
• Measures: ACV, DCV, ACA.
• Measures Phase Sequence.
• Voltage/Current Harmonics to 25th with THD.
• W3ø, HV, HA, Phase SEQ, Audible continuity tests.
• Frequency to 400Hz.
• Active, Reactive, Apparent power/ energy on.
• Power Factor, cosø on Single/Three phase systems.
• Phase sequence.

• Maximum Current:400 Amps
• Display Counts: 10000 (Backlit LCD display)
• Maximum Conductor Size:30mm
• AC Current Range:0.1A to 400A, ±(1.0% of rdg + 3 dgts)
• AC Voltage Range:0.1V to 599.9V, ±(1.0% of rdg + 3 dgts)
• DC Voltage Range:0.1V to 599.9V, ±(1.0% of rdg + 3 dgts)
• Resistance:0.1 ohm to 1999 ohms ±(1.0% + 5 dgts)
• Continuity Buzzer:Yes
• Frequency:40Hz to 399.9 Hz ±(0.5% + 1 dgt)
• Bargraph:Yes
• Autoranging:Yes
• Auto Power Off:Yes
• Peak Hold:Yes
• Data Hold:Yes
• Min/Max:Yes
• Power Supply:2 1.5V type 'AAA' batteries
• Dimensions:205mm (L) x 64mm (W) x 39MM (D)
• Weight: 280 g approx including batteries

• True RMS AC voltage and current
• DC and AC True power to 240kW
• 1.2” (30mm) Clamp digital display
• Electronic overload protection
• Continuity buzzer & Diode check
• Data hold function
• DCA zero function
• Auto power off
• Low battery indication
• AC/DC current
• Accessories: Test leads and Carrying case.

•  Ture AC power measurement, not apparent power.
• Multi-functions: Watt, ACV, ACA, DCV, DCA.
• 18 mm, large size LCD display.
• LSI circuit provides high accuracy, reliabilility and durability.

• Polarity: Bi-polar by automatic switching " - " indicates reverse plarity.
• Over Input Indication:  Indication of " 1 " or " -1 "
• Sampling Time: Approx. 0.8 sec
• Operating Temp.: 0º to 50º C ( 32º to  122º F)
• Operating Humidity: Less than 80% R.H
• Power Supply: DC 9V, 1.5 V AA (UM-3) battery X 6 PCs.
• Power Consumption: Approx. 6 mA
• Dimension: 160 x 120 x 85 mm, with housing front cover
• Weight: Approx. 575 g

• Watt ( true power ), ACV, DCV, ACA, OHMS, Diode.
• Watt measurement via the inductive clamp jaw.
• Wide range for power measurement, max. value up to 10,000 watt.
• Design meet IEC 1010 safety requirement.
• Heavy duty ACA clamp meter, 600 A max. range.
• Compact & heavy duty ABS housing plastic case.
• Measure AC current by the inductive conductor.
• LSI circuit provides high reliability and durability.
• LCD display, clear readout
• Overload protection circuit is provided for all range.

• 3½ Digit LCD display Range 
• AC Current 20 / 200Arms
• AC Voltage 200 / 600Vrms
• AC Power 20 / 200KW 
• Accuracy 1%, 
• Conductor size 40mm 
• Max., Frequency 40-400Hz.

• EN61010-1
• 600V Installation Vat Iii
• Pollution Degree 2
• True power / Apparent Power / Power Factor, True RMS V, A, W
• 3 phase Adaptor
• RS-232 Interface to talk with PC 
• 1600 point Data logger

• Analysis for 3 phase multi-power system, 1P/2W,1P/3W, 3P/3W, 3P/4W
• Voltage & Current are the True RMS value.
• True Power ( KW-MW-GW ) measurement.
• Apparent Power ( KVA-MVA-GVA ) measurement
• Reactive Power ( KVAR-MVAR-GVAR) measurement.
• Watt-Hour ( WH-SH-QH-PFH ).
• Power Factor( PF ).Phase Angle( F ).
• Voltage measurement range : 10 to 600 ACV
• Current measurement range: 0.2A to 1200 ACA.
• Programmable CT ratio (1 to 600) and PT ratio (1 to 1000).
• ACV input impedance is 10 Mega ohms.
• Safety Standard : IEC 1010, CAT III 600V
• Built-in clock and Calendar, real time data record with SD memory card , sampling time set from 2 to 7200 seconds. Just slot in the SD card into the computer, it can down load the all the measured value with the time information( year/month/data/hour/mimute/second ) to the Excel directly, then user can make the further data analysis by themselves.
• Complete set with 4 PCs Test Leads, 4 PCs Alligator clips, 3 PCs Clamp Probe, AC to DC 9V adapter,2 G SD memory card and Carrying bag.
• Computer data output, can cooperate with USB Cable /USB-01 RS232 cable/UPCB-02 and Data Acquisition software, SW-U801-WIN.

• Analysis for single phase and balanced 3 phase system
• True RMS Value  (Voltage & Current)
• Large LCD display with Backlight
• USB Interface
• Min / Max Measurement
• True power / Apparent power / power factor measurement
• Data hold / Auto ranging/ Overflow indication / Auto power off
• 2.16" (55mm) Jaw opening.

Lutron DW-6080 Watt Meter

Features:
1) Ture AC power measurement, not apparent power.
2) Multi-functions: Watt, ACV, ACA, DCV, DCA.
3) 18 mm, large size LCD display.
4) LSI circuit provides high accuracy, reliabilility and durability.

Specifications:
- Polarity: Bi-polar by automatic switching " - " indicates reverse plarity.
- Over Input Indication:  Indication of " 1 " or " -1 "
- Sampling Time: Approx. 0.8 sec
- Operating Temp.: 0º to 50º C ( 32º to  122º F)
- Operating Humidity: Less than 80% R.H
- Power Supply: DC 9V, 1.5 V AA (UM-3) battery X 6 PCs.
- Power Consumption: Approx. 6 mA
- Dimension: 160 x 120 x 85 mm, with housing front cover
- Weight: Approx. 575 g

For more details please be free to mail us.

Lutron DM-6058 Clamp Meter

Features:
- Heavy duty, max. 2000 A DCA or ACA by the inductive conductor, contactless.
- LCD display, easy & clear readout.
- High internal impedance, assures min. measuring error.
- Design meet IEC 1010 safety requirement. * LSI-circuit provides high reliability and durability.
- Multi-functions for ACA, DCA, ACV, DCV, ohms, Diode.
- Built-in low battery indicator.
- Overload protection circuit is provided for all range.
- Built-in Data Hold function.
- Compact & heavy duty ABS housing plastic case.
- Built-in Peak Hold funcion for measuring transient signal.

For more details please be free to mail us.

• 1999 Display
• Large 3 3/4 (4000 counts) LCD display
• Auto Power Off
• Conductor Size: Ø32 X 65
• Max/Min, Data Hold
• Low Battery Indication
• Overload Protection
• Double Insulation Protection Level
• Spare 5.1 Test Ring, to detect Self Precision

• 3 3/4 Digits LCD Display
• 4000 Counts
• True RMS AC
• CE CAT III 600V
• Data Hold, Continuity Diode Test
• Auto Range or Manual Range Selection
• Madx. Jaw Size: 57mm
• Low Battery Indication, Over range Indication, Polarity Indication
• DCA Auto Zero Adjustment

• AC current measurement in 1, 2 or 3-core cables
• Use on flat, round or oval cables
• Measures up to 200A on single-core cables
• Measures up to 100A on multi-core cables
• 3½ digit, 2000 count
• AC/DC voltage measurement
• Ohms measurement up to 2kW
• Frequency measurement
• Continuity Check / Beeper
• Diode Test
• LCD Backlight
• Data Hold
• CE Mark Certificated.

• 3 3/4 Digits LCD Display
• 4000 Counts
• CE CAT III 600V
• Data Hold, Continuity & Diode Test
• Auto Range or Manual Range Selection
• Max. Jaw Size: 57mm
• Low Battery Indication, Over Range Indication, Polarity Indication
• DCA Auto Zero Adjustment