Tachometer

• Range: 2 ranges, 100-20,000 RPM
• Outout: 
• Range A ( 100 - 2,000 RPM ) : 0.1 mV per RPM
• Range B ( 1,000 - 20,000 RPM ): 0.1 mV per 10 RP
• Accuracy:± (1.2% + 0.2 mV).
• Battery:4 x 1.5V AA(UM-3) size.
• Power Consumption: Approx. 150 mA
• Operating Temp. /R.H:0 to 50  ( 32 to 122  ), Less than 90% RH.
• Dimension:188 x 70 x 36 mm ( 7.4 x 2.8 x 1.4 inch )
• Weight:305g/0.67 LB (including battery)
• Accessory Included: Reflective tape marks ( 60cm), Instruction manual
• Application: To match DMM be used as a " No contact tachometer ".

• Specification: 
• Micro-computer circuit design.
• 5 digits.
• 0.4” LCD with function announciation.
• Range : 5 to 100,000 RPM.
• Resolution : 0.1RPM 
• Accuracy: 0.05%.
• Sampling Time : 1 second.  
• Memory Call last max. / min. value stored.
• Detecting distance : 50 -150mm. 
• Time Base:Quartz-Crystal.

• World's patent, Multi-functions, one instrument combine Photo Tach.( RPM ) & Contact Tach. ( RPM, m/min., ft/min. ).
• Laser light source, long detecting distance.
• Wide measuring range from 0.5 to 100,000 RPM 0.1 RPM resolution for the measured value<1000 RPM.
• High precison with 0.05% accuracy
• The last value, max., value, min. value will be stored into the memory automatically & can be obtained by pressing Memory Call Button.
• High visible LCD display gives RPM reading exactly with no guessing or errors & saves battery energy.
• This tachometer used the exclusive one chip MICRO-COMPUTER LSI circuit & crystal time base, offer the high accurate measurement & fast sampling time.
• The use of durable, long lasting components,including a strong, light weight ABS 
• plastic housing, assures almost maintenance free performance for many years.
• The housing cabinet has been carefully shaped to fit comfortable in either hand.

• Mini pocket size, easy carryout.
• Photo tachometer :5 to 100,000 RPM
• Contact tachometer : 0.5 to 19,999 RPM.
• Surface speed : m/min, ft/min.
• Laser beam for Photo tachometer, long measuring distance.
• LCD display, RS-232 interface.
• Patented.

• Micro-computer circuit design.
• 5 digits.
• 0.4” LCD with function announciation.
• Range : 5 to 100,000 RPM.
• Resolution : 0.1RPM 
• Accuracy: 0.05%.
• Sampling Time : 1 second.  
• Memory Call last max. / min. value stored.
• Detecting distance : 50 -150mm. 
• Time Base:Quartz-Crystal.

• World's patent, Multi-functions, one instrument combine Photo Tachometer RPM and Contact Tachometer ( RPM, m/min., ft/min. ).
• Wide measuring range:
  0.5 to 100,000 RPM.
  < 1,000 RPM, 0.1 RPM resolution .
• High precision with 0.05% accuracy.
• Memorize the last value, max., value, min. value
• High visible LCD display.
• Exclusive one chip LSI circuit & crystal time base
• The use of durable, long lasting components, including a strong, light weight ABS plastic housing, assures almost maintenance free performance for many years.

• Measuring Ranges : 5-19,999RPM, 0.05-1,999.9 m/min (0.2-6,560 ft/min).
• Resolution : 0.1 RPM (<1000 RPM), 1.0 RPM (>1000 RPM). 
• Accuracy : +0.05% + 1 dgt.

• High precision gasoline engine RPM measurement, measurement just clamp the Inductive Pick Up sensor to the high tension wire.
• Secondary tach. measuring method, no matter what cylinder is.
• 4 cycle & 2 cycle select switch, available the automobile engine, motorcycle engine, generator engine.
• 0.05% accuracy, high precision.
• Wide measuring range from 10 to 50,000 RPM.
• Separate inductive pick up sensor.
• Memory the last value, max., value, min. value.
• Used the exclusive one chip Micro-Computer LSI circuit, crystal time base.
• Durable housing case.

• Non-contact and contact measurement using an adapter
• Measurement for hard to reach areas using the remote sensor
• 6.0~99999.9 rev/min Measuring range with multi-unit selection
• Easy to measure In conformance to CE

• Measuring Range:6.0 - 99999.9 r/min
• Resolution:0.1 r/min
• Accuracy:±0.01%±1digit r/min, m/min (for other units, the conversion accuracy is ±0.05%±1digit)
• Sampling Time:1.0 - 10.0 seconds
• Display: 6 digits, 7 segment LCD, Battery alarm mark, Reflective light mark
• Auto Power Off:After 3 mins. from last measurement or key operation
• Data Hold Time:Measurement data: until the next data is defined
• Measuring Method:Non-contact measurement using the main unit or with remote sensor (use with reflective tape)
• Contact measurement using the in-contact adapter (use with rubber tip, surface speed wheel)
• Measuring Distance:50 - 300mm (using reflective tape)
• Power Supply:4 pcs of AAA alkaline battery (continuous measurement of 20 hrs.)
• Storage Temperature:-10 - 60°C (Non-Freezing)
• Operating Temperature:5 - 40°C (Non-Freezing)
• Operating Humidity:35 - 85%RH (Non-Condensing)
• Dimension:122(H) x 58(46)(W) x 28(D)mm
• Weight:approx 130g (including batteries)

TES RM-1500 DIGITAL TACHOMETER

Specification:
- 5 Digits LCD display.
- Light Reflex Measurement.
- Range 10.00 to 99,999 RPM.
- Measuring Distance 50 to 300mm.
- Event counter with elapsed time.
- Max./Min./Hold : True Average.
- Auto Range RPM.
- Contact RPM and circumferential velocity measurements in one simple adaptor.
- Display : 5 digits 99999 counts.
- Sampling rate : 0.7 second (> 60rpm) >1 second (10 to 60RPM).
- Measuring Distance : 50 to 300mm.
- Range Selection : Automatic.

General Specification:
1) Battery: Four 1.5V battery (AA, UM3)
2) Time Base: 4.000MHz Quartz Crystal
3) Operating Temperature:0oC ~ 50oC ( 32oF~122oF )
4) Reflective light:Red LED
5) Size:6.8"(L) x 2.5"(W) x 1.4"(H) , 175mm(L) x 65mm(W) x 36mm(H)
6) Weight : 250g (including battery)

For more details please be free to mail us.

TM-4000K TACHOMETER DIGITAL, Data Hold / Contact / Non-Contact

Specification:
1) 6 Digit LCD Display.
2) Range 30 ~ 30,000 RPM.
3) Resolution 0.1 RPM.
4) Auto power off after 2 minutes with memory.
5) Accuracy : ± 0.01%.W

For more details please be free to mail us.

LUTRON DT-2237 GASOLINE ENGINE TACHOMETER

Features: 
1) High precision gasoline engine RPM measurement, measurement just clamp the Inductive Pick Up sensor to the high tension wire.
2) Secondary tach. measuring method, no matter what cylinder is.
3) 4 cycle & 2 cycle select switch, available the automobile engine, motorcycle engine, generator engine.
4) 0.05% accuracy, high precision.
5) Wide measuring range from 10 to 50,000 RPM.
6) Separate inductive pick up sensor.
7) Memory the last value, max., value, min. value.
8) Used the exclusive one chip Micro-Computer LSI circuit, crystal time base.
9) Durable housing case.

For more details please be free to mail us.